View 958-257188_794689.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

apw electronic solutions 152 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subracks fully compatible with din41494 part 5 and iec60297-3. km6-ii ?tandard?is available in kit form, offering quick and simple assembly. km6-ii universal is a highly versatile subrack system, supplied in a wide range of kits and individual parts. it can be emc screened by the addition of various components and offers rugged construction. a wide range of accessories add to the versatility of these systems. in addition to the subracks there is a comprehensive range of compatible panels, both flat, and emc and plug-in units. km6-ii subrack km6-ii subrack emc conversion kit
apw electronic solutions 153 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii system dimensional criteria universal subrack layout standard subrack layout 3u subrack front view front panel assembly pcb mounting brackets *front panel thickness 2,50 rear extrusion 1mm insulating or conductive spacer strip used when mounting pcb backplane front panel or plug-in unit identification hole lines up with printed identification on top front extrusion drawing not to scale type b + c din 41612 connector standard backplane extrusion standard subrack universal subrack 242 174,65 / 234,65 182 175,24 / 235,24 84hp usable front aperture 482,6 (19") 465,1 card guide 12mm
apw electronic solutions 154 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii toolkit km6-ii toolkit is a cad package for users of km6-ii subracks. toolkit enables designers and production engineers to call up the various components required in a subrack and then ?ssemble?them on the cad screen. the facility is ideal for producing documentation for mechanical lay-out, shop floor assembly and quality control departments. the package will produce top, front and third angle views. in addition to other cad programs, toolkit offers compatibility with autocad r10 and subsequent revisions. using toolkit for modifying such components as extrusions, end plates and covers, a total custom package can be created. toolkit is available in various forms: ordering information disk size format order code dos 3.5 disks in dxf format 950-239856 dos 3.5 disks in iges format 950-240119 other media types may be available as a special order. an administration charge is made for the toolkit service. view from a toolkit screen; bottom left of a km6-ii assembly including end plate, mounting flange, front extrusion, and pcb guide.
apw electronic solutions 155 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii standard subracks features n versions for backplane and din 41612 connector n strong and versatile n conforms to iec 60297-3 n conductive components n 160mm mounting in 220mm versions n 3u and 6u heights n 160 and 220mm board compatible n 42hp and 84hp widths available n no adjustment after assembly n pre-tapped holes and machine screws throughout n supplied as a complete kit n reduced end plates to accept chassis supports n available with or without front handles ?tandard?subracks can be supplied with backplane or din 41612 connector mounting rear extrusion. 84hp kits are available with, or without, front handles. backplane extrusions can be converted to din 41612 using a separate connector frame. while offering ease of assembly, km6-ii ?tandard?subracks are strong and versatile. the extrusions are a larger section to improve rigidity and location of the guides. versions suitable for 220mm boards will accept 160mm boards. the end plates have mounting facilities which allow the extrusions to be reversed relative to the front end plate angles, thus providing rear access. the kit includes rear extrusions and is complete with all tapped strips. in order to maintain the front panel/connector geometry a suitable backplane spacer, either insulating or conductive, must be used on backplane versions. contents of kit item/description material/finish 2 end plates 2mm aluminum bs 1470 5251 - h24 (ns4 h6), conductive 2 end plate angles 2mm aluminum bs 1470 5251 - h24 (ns4 h6), conductive 2 front extrusions aluminum alloy bs 1474 6063t6, conductive 2 rear extrusions aluminum alloy bs 1474 6063t6, conductive 1 center rear extrusion (6u only) aluminum alloy bs 1474 6063t6, conductive tapped strips: ms zinc psssivate backplane variants 4 or 6 (3u/6u) aluminum alloy bs 1474 6063t6 din 41612 variants 2 (the rear extrusions are fully tapped) all hardware assembly instructions optional: handles note: the conductive finish gives excellent electrical conductivity but is more easily marked than anodizing. during assembly care should therefore be taken to avoid the deposition of grease and oil, particularly on visible surfaces. 3u and 6u standard subracks reversed assembly 160mm board in a 220mm subrack backplane extrusions din 41612 extrusions backplane spacers (order separately) top and bottom top and bottom tapped strip center center tapped m2,5
apw electronic solutions 156 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii standard subracks ordering information km6-ii subrack, backplane mounting description, h x d x w (hp) order code 3u x 180 x 42, no handles 950-202583 3u x 240 x 42, no handles 950-202587 3u x 180 x 84, with handles 950-232563 3u x 180 x 84, no handles 950-202581 3u x 240 x 84, with handles 950-232564 3u x 240 x 84, no handles 950-202585 6u x 180 x 42, no handles 950-202584 6u x 240 x 42, no handles 950-202588 6u x 180 x 84, with handles 950-232604 6u x 180 x 84, no handles 950-202582 6u x 240 x 84, with handles 950-232605 6u x 240 x 84, no handles 950-202586 ordering information km6-ii subrack, din 41612 connector mounting description, h x d x w (hp) order code 3u x 180 x 84, with handles 950-232568 3u x 180 x 84, no handles 950-232050 3u x 240 x 84, with handles 950-232569 3u x 240 x 84, no handles 950-232051 6u x 180 x 84, with handles 950-232607 6u x 180 x 84, no handles 950-232052 6u x 240 x 84, with handles 950-232608 6u x 240 x 84, no handles 950-232053 3u subrack 6u subrack dimensional detail front view side view top view rear extrusion (inc tapped strips) front extrusion (inc tapped strips) end plate end plate flanges 184 / 244 184 / 244
apw electronic solutions 157 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii universal subracks features n strong and versatile n two screw fixing for extrusion n conforms to iec 60297-3 n total flexibility permits wide range of configurations n available in kit or piece-part form n accurate location for first time assembly n rugged construction n pre-tapped holes and machine screws throughout n emc conversion n with or without front handles km6-ii universal subracks are strong, versatile and easy to assemble. the extrusions are of large cross section for rigidity and are secured using two fixing screws into counterbored holes. the screws thus act as location dowels giving a high degree of accuracy. this version has the capability of housing eurocards of different sizes in a variety of configurations. the frame can be constructed from standard parts in 3u, 4u, 6u, 7u and 9u heights. the endplates, 240mm, 300mm, 360mm or 420mm deep, incorporate a series of punched holes so that the extrusions can be assembled at any required position. 300mm and greater depths also have a pattern of additional holes for fixing the chassis system 84hp variants are offered in backplane or din 41612 connector mounting and are supplied with or without front handles. din 41612 rear extrusions are fully tapped. please note 4u and 7u versions can only be ordered from piece parts. alternative versions of 3u, 6u and 9u subracks can also be ordered from piece parts. sizes: 3u, 6u and 9u heights 160 and 220mm board compatible 42 and 84hp widths 160mm mounting in 220mm versions contents of kits item/description material/finish 2 end plates 2mm aluminum bs 1470 5251-h24 (ns4 h6) anodized conductive 2 end plate angles 2mm aluminum bs 1470 5251-h24 (ns4 h6) alocrom 1000 or equivalent 2 front extrusions aluminum alloy bs 1474 6063t6 rear extrusions - 2 - 3u aluminum alloy bs 1474 6063t6 3 - 6u 4 - 9u tapped strips ms zinc passivate backplane variants- 4 - 3u aluminum alloy bs 1474 6063t6 6 - 6u 8 - 9u din 41612 variants 2 (the rear extrusions are fully tapped) all hardware assembly instructions optional: handles 3u and 6u universal subracks reversed subrack backplane extrusions din 41612 extrusions backplane spacers (order separately) top and bottom top and bottom tapped strip center center tapped m2,5
apw electronic solutions 158 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii universal subracks ordering information km6-ii subrack, backplane mounting h x d x w (hp) order code 3u x 240 x 42, no handles 950-202592 3u x 240 x 84, with handles 950-232565 3u x 240 x 84, no handles 950-202589 3u x 300 x 84, with handles 950-232566 3u x 300 x 84, no handles 950-223550 3u x 360 x 84, with handles 950-232567 3u x 360 x 84, no handles 950-202594 6u x 240 x 42, no handles 950-202593 6u x 240 x 84, with handles 950-232599 6u x 240 x 84, no handles 950-202590 6u x 300 x 84, with handles 950-232601 6u x 300 x 84, no handles 950-223551 6u x 360 x 84, with handles 950-232602 6u x 360 x 84, no handles 950-202595 6u x 420 x 84, with handles 950-232603 6u x 420 x 84, no handles 950-202597 9u x 240 x 84, no handles 950-202591 9u x 300 x 84, no handles 950-224198 9u x 360 x 84, no handles 950-202596 9u x 420 x 84, no handles 950-202598 km6-ii subrack, din 41612 connector mounting 3u x 240 x 84, with handles 950-232570 3u x 240 x 84, no handles 950-232054 3u x 360 x 84, with handles 950-232571 3u x 360 x 84, no handles 950-232055 6u x 240 x 84, with handles 950-232609 6u x 240 x 84, no handles 950-232056 6u x 360 x 84, with handles 950-232610 6u x 360 x 84, no handles 950-232057 3u subrack 6u subrack front view side view plan view rear extrusion (including tapped strips) front extrusion (including tapped strips) end plate end plate angles for 9u versions, add 133,35 to height dimensions 240/300/360/420 240 / 360
apw electronic solutions 159 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts km6-ii universal - piece parts it is possible to order km6-ii universal subracks from piece parts. this allows special configurations to be achieved. 4u and 7u universal subracks can only be ordered from piece parts. all basic components are detailed on the next three pages. typical example: what must i order? to achieve a basic 3u universal subrack you must order the following: 2 end plates 2 or 4 tapped strips 2 end plate angles 1 packet of hardware 1 front extrusion (top) hardware screws (m4 x 25skt cap) 1 front extrusion (bottom) 2 rear extrusions km6-ii universal subrack km6-ii universal subrack
apw electronic solutions 160 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts end plates and end angles universal end plates are punched on a 12mm pitch along their length to enable extrusions to be mounted to meet customer applications. identifications are stamped on the end plate to assist in extrusion location. end plates and end plate angles are sold separately (i.e. 2 required for each subrack). endplate angles are available with or without handle hardware holes. the 4u x 360 and 7u x 420 versions can be assembled as 3u/6u + 2 x 0.5u or 3u/6u + 1u. ordering information height x thickness x depth order code 3u x 2 x 240 950-202787 3u x 2 x 300 950-221911 3u x 2 x 360 950-202790 4u x 2,5 x 240 950-202618 4u x 2,5 x 360 950-202620 6u x 2 x 240 950-202788 6u x 2,5 x 300 950-221912 6u x 2,5 x 360 950-202791 6u x 2,5 x 420 950-202793 7u x 2,5 x 420 950-259286 9u x 2,5 x 240 950-202789 9u x 2,5 x 300 950-224197 9u x 2,5 x 360 950-202792 9u x 2,5 x 420 950-202794 end plate angles ordering information order code order code height x thickness with handle holes w/out handle holes 3u x 2 950-232632 950-202783 4u x 2,5 - 950-202616 6u x 2 950-232633 950-202784 6u x 2,5 950-232635 950-202785 7u x 2,5 - 950-259287 9u x 2,5 - 950-202786 note: 6u angles vary according to end plate width for 4u or 7u dimensions add 44,45 to the 3u or 6u height dimensions. 4u and 7u have a row of holes to suit 3u components. 6u - 265,9 9u - 399,2mm pitches at 44,45mm 3u - 132,5 3u 6u 9u end plates conductive finish anodized end plate angles end plates and end plate angles pitch is @ 48mm
apw electronic solutions 161 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts subrack handles n comfortable hand grip n range of sizes as supplied in some standard km6-ii subrack kits, these handles are also available separately. the 3u & 6u end plate flanges shown above have the mounting holes, and other sizes should be modified accordingly. contents of kit item/description material/finish 1 handle aluminum alloy e6, etch and clear anodized ordering information description height (u) a b order code handle 3 116,3 108,3 50-10117 handle 4 160,8 152,8 50-10116 handle 6 249,7 241,7 50-10118 screw m3, 5 x 10 countersunk head pk 10 173-10036 subrack handles
apw electronic solutions 162 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts km6-ii front extrusions km6-ii front extrusions include a two screw fixing facility. accuracy of alignment is ensured by the dowel fixing screws. a slot enables guides to be secured using m2,5 x 5 screws and a tapped strip. dust covers and emc covers are also attached to these extrusions. standard front extrusions have slot identification printed along their length to aid guide location. top versions also have a printed ident/label on the front face for panel location. in addition to the standard front extrusion, there are three other types: plain, which has no guide location holes; this extrusion is included in emc conversion kits and can also be used for attaching additional panels (e.g. for rear socket mounting). lipless, which has normal guide location holes but offers two facilities; if used as a height dividing extrusion, it is possible to use overall front panels; it will also fit within an emc screen, permitting the recessing of cards. injector/ejector, which is a modified normal front extrusion with an added feature which provides the operating surface for the injection of pcb?. this feature reduces the vertical front aperture to 105,9mm (on a 3u). these three latter extrusions are supplied in 84hp lengths and are not silk screen printed. contents of kit item/description material/finish 1 extrusion aluminum alloy bs 1474 6063t6 conductive ordering information description order code 24hp top front extrusion 950-202796 24hp bottom front extrusion 950-202795 42hp top front extrusion 950-202736 42hp bottom front extrusion 950-202735 60hp top front extrusion 950-202743 60hp bottom front extrusion 950-202742 84hp top front extrusion 950-202644 84hp bottom front extrusion 950-202643 plain front extrusion 950-221909 lipless front extrusion 950-233073 injector/ejector front extrusion 951-232445 km6-ii front tie bars normal front extrusion overall front panel lipless extrusion used to divide a 6u km6-ii lipless front extrusion used to recess pcb? in a shielded km6-ii standard lipless injector/ejector plain extrusion 9,90 8,50 13,30 9,20 2,90 12,00 32,55 24,00 49,85 24,00 46,95 24,00 49,85 2,90 tapped strip 24 hp = 127,4 42 hp = 218,84 60 hp = 310.28 84 hp = 432,12 screw retention of guides in a universal subrack
apw electronic solutions 163 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts rear extrusions for backplane mounting, the km6-ii rear extrusions accept tapped strips. in order to maintain correct connector geometry it is necessary to fit a spacer, either co nductive or insulating between extrusion and motherboard/backplane. top and bottom rear extrusions are supplied separately. backplane extrusions can be converted to din 41612 by means of a connector mounting frame. contents of kit item/description material/finish 1 extrusion aluminum alloy bs 1474 6063t6, conductive* finish. *note: alocrom 1000 or equivalent ordering information rear extrusions backplane mounting order code 24hp top and bottom 950-202797 42hp top and bottom 950-202737 60hp top and bottom 950-202744 84hp top and bottom 950-201276 for din 41612 connector mounting the extrusion is pre-tapped m2.5 on a 1hp pitch. these extrusions are printed with connector location ident/label, but are not asymmetrical. contents of kit item/description material/finish 1 extrusion aluminum alloy bs 14746063t6, conductive* finish. *alocrom 1000 or equivalent ordering information rear extrusions backplane mounting order code 84hp top and bottom 950-229781 24hp = 127,4 42hp = 218,84 60hp = 310,28 84hp = 432,12 backplane top and bottom din 41612 top and bottom tie bar backplane top and bottom tie bar 432,2 22 40 24 din 41612 top and bottom
apw electronic solutions 164 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack - piece parts rear extrusions for backplane mounting, the km6-ii rear extrusions accept tapped strips. in order to maintain correct connector geometry it is necessary to fit a spacer, either co nductive or insulating between the extrusion and motherboard/backplane. for din 41612 connector mounting the extrusion is pre-tapped m2.5 on a 1hp pitch. these extrusions are printed with connector location idents/labels, but are not asymmetrical. the center rear comprises a two-part extrusion kit and a facility is provided for fitting a forward facing tapped strip if required. backplane extrusions can be converted to din 41612 by means of a connector mounting frame. contents of kit item/description material/finish 1 extrusion aluminum alloy bs 1474 6063-t6, conductive* finish. *alocrom 1000 or equivalent ordering information rear extrusions backplane mounting order code 24hp center 950-202798 42hp center 950-202738 60hp center 950-202745 84hp center 950-201277 rear extrusions din 41612 connector mounting 84hp center 950-229784 din 41612 center rear 24hp = 127,4 42hp = 218,84 60hp = 310,28 84hp = 432,12 backplane center rear 43 48 21 13,5 432,2 din 41612 center rear backplane center rear
apw electronic solutions 165 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack accessories tapped strips tapped m2,5 on a pitch of 1hp, these strips are used for securing front panels, backplanes, or as an option for chassis plates. as an alternative to tapped strips, a slide nut suitable for use in front extrusions can only be used where a small number of locations are required. contents of kit item/description material/finish 1 tapped strip mild steel zinc and color passivate ordering information description order code 24 hp tapped strip 950-202799 42 hp tapped strip 950-202739 60 hp tapped strip 950-202740 84 hp tapped strip 950-202001 slide nut (pk 10) 124-30499 din 41612 connector mounting frame n converts backplane extrusions to din 41612 mounting n allows separate sub-assembly wiring n 3u height n various widths this frame is supplied as a kit comprising 2 aluminum extrusions with m2,5 holes on a 1hp pitch, two steel end plates and mounting hardware. ordering information description order code 24 hp din 41612 connector mounting frame 950-34247 42 hp din 41612 connector mounting frame 950-34246 84 hp din 41612 connector mounting frame 950-34244 finish: conductive as an alternative to the mounting frame the horizontal extrusions are available in separate kits. a 6hp version can be used for mounting one connector to mate with a power supply plug-in unit. the kit comes with two extrusions and mounting hardware. an 84hp version is also available. ordering information description order code 6hp horizontal extrusions separate kits 950-249491 84hp horizontal extrusions separate kits 950-249489 backplane spacer strips two types of spacer strips are available, insulating and co nductive. the insulating type is available in one and two level versions, each having half shears to aid assembly. the two-level version is used on center rear extrusions. the 84hp strips can be cut down for smaller widths. the conductive strip is 42hp wide. supplied individually. contents of kit item/description material/finish insulating spacer 1mm insulating/grey pvc ul94vo conductive 1mm ms zinc and passivate ordering information description order code insulating spacer single level 950-10014 insulating spacer two level 950-10015 conductive spacer 42hp 173-60788 tapped strips din 41612 connector mounting frames backplane spacer strips insulating spacers conductive spacer 24hp = 127,4 42hp = 218,84 60hp = 310,28 84hp = 432,12
apw electronic solutions 167 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack accessories km6-ii guides single piece guides type 1 pcb -for eurocards of 1,6mm thickness, either 100mm, 160mm or 220mm long. compatible with grounding clip. type 2 pcb -for eurocards of 2,4mm thickness, either 160mm or 220mm long. type 3 piu -plug-in unit (piu) type for cards 111,76 or 245,1mm height, 1,6mm thickness, 160 or 220mm long. type 4 pcb-for eurocards of 1,6mm thickness, 220mm long, this guide will fit over intermediate extrusions, permitting mixing of pcb depths. compatible with grounding clip. contents of kit item/description material/finish types 1, 3, 4 luranyl 2452/1 or equivalent. green. types 2 luranyl 2452/1 or equivalent. black. ordering information description pk order code type 1 guide, pcb 1,6mm thick, board length 100 10 950-242850 type 1 guide, pcb 1,6mm thick, board length 160 10 950-232662 type 1 guide, pcb 1,6mm thick, board length 220 10 950-232663 type 2 guide, pcb 2,4mm thick, board length 160 10 173-232666 type 2 guide, pcb 2,4mm thick, board length 220 10 173-232667 type 3 guide, plug-in-unit, board length 160 10 950-232664 type 3 guide, plug-in-unit, board length 220 10 950-232665 type 4 guide, low profile, board length 220 10 950-232668 type 1 guide, pcb 1,6mm thick, board length 160 1000 956-243239 type 1 guide, pcb 1,6mm thick, board length 220 1000 956-243240 three piece guides type 5 aluminum center section, with plastic slide in guide section, for 280mm, 340mm or 400mm lengths, 1,6mm thickness. order separately: end feet for pcb or plug-in unit. type 6-three part guide end feet for eurocards of 1,6mm thickness. type 8-three part guide end feet for plug-in unit of 1,6mm thickness. contents of kit item/description material/finish type 5 al extrusion, anodized, plastic side-in section noryl 2452/1, black. type 6 and 8 noryl 2452/1, green. luranyl 2452/1 is a ul94 vi rated material with a continuous rating of 105? ordering information description unit order code type 5 280mm board pk 10 950-276108 type 5 340mm board pk 10 950-276109 type 5 400mm board pk 10 950-276110 type 6 pcb guide feet 10 prs 950-202635 type 8 plug-in guide feet 10 prs 950-202636 one piece guides 1234 658 one piece guides
apw electronic solutions 168 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack accessories pcb grounding clip n electrostatic protection n no screws required this grounding clip can be inserted into the front or rear of 1,6mm pcb guides in km6-ii subracks. contacts on the clip provide electrical continuity between a suitably equipped eurocard and, via a spring under the clip, standard front extrusions. pcb? can, thus be grounded before the engagement of connectors. the clip, which is supplied in packs of 10, fits into a ?ocket?in the guide and requires no screw hardware to maintain contact. the modification required to the pcb takes the form of a conductive strip along the edge of the board, (see illustration) either on the left or right side. the clip has been tested to iec 950: 1986 section 2.5.11. in testing, the clip reached a steady temperature of 76 degrees c at 15a, with a resistance path of 7 mohms. a typical electrostatic discharge would be 12a for a period of 1 microsecond. the clip is designed to provide a ground path for electrostatic charges, not for a power short circuit or as a ground rail. contents of kit item/description material/finish grounding clip, pk 10 0,15mm spring steel plated ordering information description order code grounding clip pk 10 950-251366 positive guide retention all km6-ii guides, with the exception of the 2,4mm slot version, can be bolted down to a tapped strip in the front extrusion to give shock and vibration resistance. tapped strips (detailed below and supplied individually) should be selected by subrack type and width. the screw used is m2,5 x 5mm cheesehead, supplied in a packet of 100. ordering information description order code ?tandard?42 hp subrack 173-12706 ?tandard?84 hp subrack 173-12704 universal 24 hp subrack 950-202799 universal 42 hp subrack 950-202739 universal 60 hp subrack 950-202740 universal 84 hp subrack 950-202001 security fixing screws m2,5 x 5 173-202579 note: for other widths and for divider kits, a longer strip should be cut down to size pcb grounding clip top detail of grounding strip requirements on a standard eurocard - wiring and/or component side pcb guides plug-in unit guides 3 part guides positive guide retention guide length ??guides should be cut to pcb length minus 76mm screw retention of guides in a km6-ii subrack tapped strip 3 11 3 22 3 2
apw electronic solutions 169 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii divider kits km6-ii 6u front divider kits km6-ii, front divider kits can be fitted after assembly of the subracks. for use with 6u subracks, these divider kits provide a useful way to mix 3u and 6u board heights within a unit. the divider section is available in different widths from 21 hp measured from either the left hand or right hand side. the design of the kit is such that there is no loss of front panel space. it should be noted, however, that the divider plate restricts the use of ??type connectors to plug-in units of 4 hp width, or greater, at the position immediately to the left of the plate. contents of kit item/description material/finish 2 front extrusions and aluminum alloy bs 1474he9tf tapped strips conductive finish 1 6u divider plate 1,6mm aluminum alloy (not 84hp version) bs1470ns4 1/2h conductive finish location moldings luranyl 2452/1 (not 84hp version) fixing screws km6-ii left hand and right hand divider kit ordering information description order code 6u left hand divider kit, width 21 hp 950-202604 6u left hand divider kit, width 24 hp 950-202605 6u left hand divider kit, width 42 hp 950-202606 6u left hand divider kit, width 60 hp 950-202607 full width divider kit, width 84 hp 950-201275 ordering information description order code 6u right hand divider kit, width 21 hp 950-202609 6u right hand divider kit, width 24 hp 950-202610 6u right hand divider kit, width 36 hp 950-202615 6u right hand divider kit, width 42 hp 950-202611 6u right hand divider kit, width 60 hp 950-202612 full width divider kit, width 84 hp 950-201275 km6-ii 9u front divider plate this plate will divide a 9u subrack into 3u and 6u sections. it should be ordered in conjunction with 6u front divider kits. (the 6u plate is discarded.) ordering information description order code 9u divider plate 950-202622 m m = denotes minimum order quantity, please contact our sales office km6-ii front divider kit front divider kit front divider plate 6u left hand divider kits 6u right hand divider kits m
apw electronic solutions 170 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii divider kits non standard divider extrusions in order to produce other widths of divider kits, a larger, standard width should be modified as shown: hp x 5,08 - 1,65 hp x 5,08 + 2,54 left right tap m4 x 17,2mm depth dimensional detail - front dividers front 60hp 42hp 36hp 24hp 32hp 21hp 108,62 123,86 164,50 184,82 215,3 306.74 427,12 84 482,6 265,85 132,5 132,5 383,65 10,85 133,35 10,85 119,73 8,0 3,0 38,35 18,45 3,2 tap
apw electronic solutions 171 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii divider kits hp x 5,08 - 0,6 hp x 5,08 + 4,48 left right tap m4 x 15. csk ? x 90 rear rear divider kits rear divider kits reduce the depth of a subrack locally by 60mm, thus permitting a subrack to be divided into different pcb depths (160 and 220mm for instance). the kit contains rear extrusions, rear divider plate and assembly screws. tapped strips are not included, but should be cut down to suit from larger ones. the extrusions are tapped in handed pairs and the counterbored end fits to the end plate. 3u and 6u rear divider plates are available the 6u version should be attached to the center rear extrusion using a small section of tapped strip in the forward slot of that extrusion. contents of kit item/description rear extrusions rear divider plate assembly screws ordering information description order code right hand 6u x 36 hp 950-203688 km6-ii rear divider plates rear tie bars, tapped strips and mounting hardware should be ordered separately. contents of kit item/description material/finish divider plate 1,6mm aluminum alloy conductive mounting hardware ordering information description order code 3u rear divider plate 950-202623 6u rear divider plate 950-202624 note: when fitting a rear divider plate to a 6u subrack a short piece of tapped strip must be fitted to the center rear tie bar. non standard divider extrusions in order to produce other widths of divider kits, a larger, standard width should be modified as shown: rear divider kit tap
apw electronic solutions 172 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack accessories horizontal mounting modules this unit, fitting into a subrack similar to a 3u module, is in fact a 6u 20hp subrack on its side. this permits the use of standard guides, front panels, plug-in units and solves the problem of housing 6u eurocards in a 3u subrack. the horizontal mounting module offers a number of additional advantages. it can be sub-assembled separately from the main subrack, and it offers plenum cooling between the end plates. contents of kit item/description material/finish 2 end plates 2,0mm al chromate 2 front tie bars bs 1474 he 9 te extrusion chromate 3 rear tie bars bs 1474 he 9 te extrusion chromate 4 insulating strips pvc grey ul 94.vo 6 tapped strips mild steel zinc and passivate 2 trim panels 1,0mm al etch and clear anodize 1 filler panel 2,5mm al etch and clear anodize 1 insulating sheet mylar 240 all hardware by fitting one or two plug-in unit guides to the main subrack the unit can be fully supported. order separately guides, connector mounting frame, cooling module, accessories. ordering information description order code horizontal module x 160mm 950-202971 horizontal module x 220mm 950-202972 pcb guide 160mm (pk10) 950-232662 pcb guide 220mm (pk10) 950-232663 plug-in unit guide 160mm (pk10) 950-232664 plug-in unit guide 220mm (pk10) 950-232665 horizontal mounting modules front view 54hp 54hp 20hp
apw electronic solutions 173 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii subrack accessories km6-ii hardware subracks ordering information function description order code 1 end plate to extrusions screw m4 x 25 skt cap 950-202734 2 connector to rear extrusion screw m2,5 x 6mm 173-12530 3 backplane to backplane extrusion screw m2,5 x 5mm 173-202579 4 guides to front extrusion m2,5 x 6mm 173-12530 5 backplane to backplane extrusion m2,5 x 8mm 41-227257 note: all packs contain 100 units plug-in units and front panels ordering information function description order code f connector to mounting block screw m2,5 x 10mm 41-20505 7 connector to pcb screw m2,5 x 10mm 41-20505 8 nut for above m2,5 27-1319 9 handle to front panel screw m2,5 x 16mm 174-63105 note: all packs contain 100 units km6-ii hardware 1 2 3 5 6 78 9 4 6mm 10mm 8mm 10mm 16mm 5mm 25mm 6mm
apw electronic solutions 174 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii hinged front panels km6-ii horizontally hinged panel typically used in situations where quick access is needed to equipment, but it is not desirable to remove the panel completely - e.g. as a socket mounting or display panel. a range of aluminum panels is supplemented by a 3u, 84hp smoked transparent version for use where it is necessary to view instruments or indicators. standard kits are supplied with plastic hinges. a die-cast metal hinge kit is available separately as an accessory to replace the plastic type. version 1 (as above) version 3 is a decorative panel, being entirely anodized after manufacture. it is supplied in kit form with plastic inserts as standard. these inserts can be replaced with a metal type. contents of kits item/description material/finish hinged panel lexan polycarbonate, ul 94.vo two hinges and hardware polypropylene, black metal hinge kit: two hinge sets and hardware mazak, black ordering information description a order code 3u x 24hp hinged front panel version 1 121,52 953-236180 3u x 42hp hinged front panel version 1 212,96 953-236181 3u x 60hp hinged front panel version 1 304,40 953-236182 3u x 84hp hinged front panel version 3 426,32 953-236184 6u x 84hp hinged front panel version 3 426,32 953-236190 smoked transparent front panel 3u/84 hp 426,32 953-236516 metal hinge kit 174-26556 km6-ii horizontally hinged panel plastic hinge (supplied) metal hinge (accessory) 24hp - 84hp
apw electronic solutions 175 apw electronic solutions toll free (800)367-3765 fax: (858)679-4555 www.apw-elsol.com specifications subject to change without notice km6-ii hinged front panels km6-ii vertically hinged panel two hinge types are available: heavy duty metal and a lighter duty, plastic type. they can be hinged right or left as required. both types are supplied in 3u and 6u, 84hp wide. contents of kits item/description material/finish panel 1 set of hinges luranyl 2452/1 black metal hinges die-cast end bracket, extruded aluminum hinge plate all hardware ordering information description order code 3u x 84hp plastic hinge type 953-236121 6u x 84hp plastic hinge type 953-236124 3u x 84hp heavy duty hinge type 953-236125 6u x 84hp heavy duty hinge type 953-236126 km6-ii plastic hinge versions km6-ii heavy duty hinge version heavy duty version normal version

▲Up To Search▲

Price & Availability of 958-257188

	To Download 958-257188 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .